Main Features
- Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
- Adopt integrated hydraulic system, more reliable and easy for maintenance.and the hydraulic system from Bosch-Rexroth,Germany.
- The Hydraulic Guillotine is a Swing Beam Action machine which is produced in a variety of cutting lengths and capacity.
- The distance of the backgauge is adjusted by the motor and is well adjustment is displayed by E21with Delta inverter.
- Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.
- Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety to CE regulation.
Standard Equipment
- Estun E21sNC controlSystem
- PoweredBack gaugeX-axis
- DELTAInvertercontrolled back gauge
- HIWIN Ball screws & Polished rodwith 0,05mm accuracy.
- Squaring Arm and Front Support Arms
- Germany Bosch-Rexroth Hydraulic
- Germany EMB Tubing connector
- Germany Siemens Main Motor
- Telemecanique/SchneiderElectrics
- Hydraulic &Electrical overload protection
- Cutting Line Illumination and wire for shadow line cutting
- Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si)
Safety Equipment
- Safety Standards(2006/42/EC):1.EN 12622:2009 A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006 A1:2009
- Front finger Protection(Safety light curtain)
- South Korea Kacon Foot Switch(Level 4 of safety)
- Back metal safe fencewith CE standards
- Safety relay with Monitor the pedal switch and safety protection4,
Main Configuration
Serial No. | Part Description | Brief instruction/ Orignal | Other |
|---|---|---|---|
1- | NC Control system | ■E21s NC System□E10s NC System | |
2- | Electrical components | Schneider Electrical from French | Travel switch & Limit switch |
3- | Main Motor | Siemens from Germany Brand | |
4- | BackGauge & RAM Drive | Inverter from Taiwan delta | Accurate positioning control |
5- | Foot switch | KACON from South Korea | |
6- | Hydraulic System | Bosch-Rexroth form Germany | |
Sealing Element | PARKER from U.S.A Brand | ||
7- | Tubing connector | EMB form Germany Brand | |
8- | Ball screw/ Polished rod | HIWIN from TaiWan Brand | |
2.Equipment | |||
1- | Pneumatic sheet support system | □Yes■No | |
2- | Rear sheet sliding plates | ■Yes □No | Fixed type(metal) |
3- | Angle Gauge | □Yes■No | |
4- | Squaring Arm(800mm) | ■Yes □No | |
5- | Inverter accurate control | ■Yes □No | |
6- | Light curtains for finger Protection | □Yes■No | Reset button |
7- | Back safety Sensors | □Yes■No | |
8- | Back metal fence Safety | ■Yes □No | |
9- | Safety standards | ■CE □CSA □NR-12 □OSHA | |
Main specifications
Shearing thickness | Shearing width | Number of stroke mm | Backgauge range mm | Shearing angler | Backgauge range mm | Motor power KW | |
|---|---|---|---|---|---|---|---|
6×2500 | 6 | 2500 | 16~35 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×3200 | 6 | 3200 | 14~35 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×4000 | 6 | 4000 | 10~30 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×5000 | 6 | 5000 | 10~30 | 20-800 | 30’-1°30 | 800 | 11 |
6×6000 | 6 | 6000 | 8~25 | 20-800 | 30’-1°30 | 800 | 11 |
8×2500 | 8 | 2500 | 14~30 | 20-600 | 30’-1°30 | 600 | 11 |
8×3200 | 8 | 3200 | 12~30 | 20-600 | 30’-2° | 600 | 11 |
8×4000 | 8 | 4000 | 10~25 | 20-600 | 30’-2° | 600 | 11 |
8×5000 | 8 | 5000 | 10~25 | 20-800 | 30’-2° | 800 | 15 |
8×6000 | 8 | 6000 | 8~20 | 20-800 | 30’-2° | 800 | 15 |
12×2500 | 12 | 2500 | 12~25 | 20-800 | 30’-2° | 800 | 15 |
12×3200 | 12 | 3200 | 12~25 | 20-800 | 30’-2° | 800 | 15 |
12×4000 | 12 | 4000 | 8~20 | 20-800 | 30’-2° | 800 | 15 |
12×5000 | 12 | 5000 | 8~20 | 20-800 | 30’-2° | 800 | 22 |
12×6000 | 12 | 6000 | 6~20 | 20-1000 | 30’-2° | 1000 | 30 |
16×2500 | 12 | 2500 | 12~20 | 20-800 | 30’-1°30 | 800 | 22 |
16×3200 | 16 | 3200 | 12~20 | 20-800 | 30’-1°30 | 800 | 22 |
16×4000 | 16 | 4000 | 8~15 | 20-800 | 30’-1°30 | 800 | 22 |
16×5000 | 16 | 5000 | 8~15 | 20-1000 | 30’-1°30 | 1000 | 30 |
16×6000 | 16 | 6000 | 6~15 | 20-1000 | 30’-1°30 | 1000 | 37 |
20×2500 | 20 | 2500 | 10~20 | 20-800 | 30’-3° | 800 | 30 |
20×3200 | 20 | 3200 | 10~20 | 20-800 | 30’-3° | 800 | 30 |
Shearing thickness | Shearing width | Number of stroke mm | Backgauge range mm | Shearing angler | Backgauge range mm | Motor power KW | |
|---|---|---|---|---|---|---|---|
6×2500 | 6 | 2500 | 16~35 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×3200 | 6 | 3200 | 14~35 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×4000 | 6 | 4000 | 10~30 | 20-600 | 30’-1°30 | 600 | 7.5 |
6×5000 | 6 | 5000 | 10~30 | 20-800 | 30’-1°30 | 800 | 11 |
6×6000 | 6 | 6000 | 8~25 | 20-800 | 30’-1°30 | 800 | 11 |
8×2500 | 8 | 2500 | 14~30 | 20-600 | 30’-1°30 | 600 | 11 |
8×3200 | 8 | 3200 | 12~30 | 20-600 | 30’-2° | 600 | 11 |
8×4000 | 8 | 4000 | 10~25 | 20-600 | 30’-2° | 600 | 11 |
8×5000 | 8 | 5000 | 10~25 | 20-800 | 30’-2° | 800 | 15 |
8×6000 | 8 | 6000 | 8~20 | 20-800 | 30’-2° | 800 | 15 |
12×2500 | 12 | 2500 | 12~25 | 20-800 | 30’-2° | 800 | 15 |
12×3200 | 12 | 3200 | 12~25 | 20-800 | 30’-2° | 800 | 15 |
12×4000 | 12 | 4000 | 8~20 | 20-800 | 30’-2° | 800 | 15 |
12×5000 | 12 | 5000 | 8~20 | 20-800 | 30’-2° | 800 | 22 |
12×6000 | 12 | 6000 | 6~20 | 20-1000 | 30’-2° | 1000 | 30 |
16×2500 | 12 | 2500 | 12~20 | 20-800 | 30’-1°30 | 800 | 22 |
16×3200 | 16 | 3200 | 12~20 | 20-800 | 30’-1°30 | 800 | 22 |
16×4000 | 16 | 4000 | 8~15 | 20-800 | 30’-1°30 | 800 | 22 |
16×5000 | 16 | 5000 | 8~15 | 20-1000 | 30’-1°30 | 1000 | 30 |
16×6000 | 16 | 6000 | 6~15 | 20-1000 | 30’-1°30 | 1000 | 37 |
20×2500 | 20 | 2500 | 10~20 | 20-800 | 30’-3° | 800 | 30 |
20×3200 | 20 | 3200 | 10~20 | 20-800 | 30’-3° | 800 | 30 |